|
| |
|
|
Policy
- Test reports are issued at the completion of all tests
- Minimum invoice charge is $100.00
- Rush work is subjected to a 50% surcharge (except as noted)
- Discounts are available on large lots of tests carried out
on a routine basis
- Test specimens are retained for 90 days
- Packaging, handling and freight
charges will be billed for the return of test specimens
- MSDS to accompany hazardous products
- Disposal of hazardous samples will be
billed at $2.00 per sample
Sample Requirements
| Chemical
Analysis |
|
|
Metals
|
- 5 grams minimum, 10
grams preferred |
|
Aqueous Samples
|
- 1/2 litre minimum, 1 litre
preferred |
|
Solid Particulate Samples
|
- coarse (> 6mm) 1 kilogram
minimum
- medium (1 to 5 mm) 500 grams minimum
- fines (< 1 mm) 100 grams minimum |
| Automotive
Testing |
- at least one part (three preferred) for
each individual test |
| Tensile
Test |
- a length of eight inches is usually
required
- a three inch length may be sufficient |
| Bend
Test |
- ten inch length |
| Weld
Procedure Qualification |
- welded test plate should be a minimum of 10
inches wide by 12 inches along the weld, 16 inches along the weld if
Charpy V-Notch impacts required
- pipe qualifications
|
| |
- over 3" nominal diameter
O.D. - 1 pipe
- 2 - 3" nominal O.D. - 2
pipes
- less than 2" nominal pipe -
3 pipes
- Charpy V-Notch impacts may
require more material depending on pipe size and quantity of
impact tests
|
Contact CMTL for the
sample requirements of other materials or tests
Sample Documentation
Appropriate documentation should accompany all test
samples.
-
test requirements, specifications requirements
-
sample identification
-
report delivery instruction including the person's name
|
|
|
|
For further information
and pricing, contact our Customer Service Department at (519) 621-6600
|
|
|
|
